Monday, 9 November 2015

GE Monogram Refrigerator Temperature

How to Adjust GE Monogram Refrigerator Temperature Controls – Cor-Jus Enterprises recommends the following when adjusting the controls to your GE Monongram Series Appliances. Whether your model is a side by side, bottom mount, or single door built-in refridgerators the procedure is the same. The controls are found on the inside of the appliance on top of the fresh food compartment. When the door is opened the read-outs will tell actual temperatures in both the freezer and refrigerator sections. Actual temperatures may vary based on conditions such as: door openings, food load, Defrost Cyclying and actual room temperature.


To check what settings your appliances are set at simply press either the plus, or minus buttons once…the display will change briefly to what actual temp is to what has been selected for the machine, before cyclying back to actual again. This process may also be repeated for either freezer, or fridge sections. To alter permanent settings simply press either plus or minus button once for every degree change you desire. If a change from Fahernheit to Celsius is wanted, just press once on the display mode to enact the change.

Please keep in mind that the minimum safety requirements for food storage are for fresh food, is 34-45* F, and for frozen is between -6 & 6* respectively. Please keep in mind that 24 hours should be allowed for desired temperature changes to fully take affect. For more info visit : http://corjusenterprises.net/how-to-adjust-ge-monogram-refridgerator-temperature-controls/

No comments:

Post a Comment